Posts tagged: sewing

That went over pretty well

IMG_4563

And here they are modeling their new pjs – and hat, from a sweet mama I “know” from an online message board.

IMG_4566

And they’re done

This pair is for Zoe’s birthday.

Jamma jamma jamma jamma, pj!

I made these a few weeks ago and am in the process of making another pair. Kwik Sew 3016, size 6 with the length of size 7 in the bottoms and an additional inch in the sleeves.

IMG_4473

The embroidery for the top on the second one just finished.

The design is from Bunnycup Embroidery. It’s stabilized with a layer of Sulky Sticky + on the bottom and two layers of Super Solvy water soluble on top. Pink microfleece – cozy for winter.

Embroidery thread and colors:
1 – Coats & Clark 18-460
2 – C&C H8-48A
3 – C&C J8-158
4 – C&C UB-277
5 – C&C G6-38

fleece socks and the elusive flatlock

I’ve tried to figure out how to flatlock fleece on my serger for a while, never achieving much success. After my favorite pair of fleece socks passed the two holes in the bottom mark, I decided I either needed to get it working or buy new socks. I searched online, finding helpful sites telling me to adjust my tension and so on. They all sounded like they knew what they were talking about, but my serger is a BabyLock Imagine. There is no tension to adjust. (Yes, I know I can make some adjustments to the needle tension, but that wasn’t relevant here.)

Once again, I pulled out my trusty manual and carefully followed the instructions for flatlocking. I just couldn’t get the fabric to lay flat. I decided to look at the other stitches. The blanket stitch and ladder stitch looked like possibilities. Would they be strong enough? They are described as decorative stitches and I’m trying to keep a sock together. The blanket stitch instructions involved water soluble stabilizer and more fuss than I wanted, so I went with the ladder stitch first. I’m so glad!

Check it out -

Kwik Sew 2918

This one is for my nephew, whose birthday was Friday. Kwik Sew 2918 in size 2T. Hope it fits!

IMG_4386

Happy Birthday Parker!

Something for the boy I never sew for…

13 is challenging. On the one hand, you want your mom to do stuff for you just like she does for your siblings. On the other hand, you’re 13 and you want to wear cool stuff. This generally means sewing for Alex is pajamas.

This is Kwik Sew 3045, size XS. Based on the pattern information, this should have been much bigger on him. It’s fine, but if I make him another one, I’ll probably go with a size small. This is view B, which was to have hemmed rather than cuffed sleeves and a drawstring at the bottom hem. The drawstring was deemed stupid, so I didn’t bother with it. Hoodies have cuffs on the sleeves, so I added a 2″ cuff. Adding the cuff was probably a good idea since it also made the sleeve length more comfortable.

Fabric is 100wt microfleece from Malden Mills/Polartec. Very nice material, probably the best microfleece out there. It’s actually a pretty dark navy color, the camera flash kind of pops the color. Definitely a good color for Alex, though. Check out the blue eyes on this boy.

I’m supposed to wear something cute

This is the answer to the request from Zoe for something cute for picture day. While I thought she had plenty of “cute” things that would be lovely for picture day, she apparently felt differently. I would have appreciated her sharing this information sometime earlier than the day before picture day, but what fun would that be? This picture is about a week after picture day. I’m not sure if these were the tights she had on for picture day, and I’m pretty sure we picked up this pair of shoes after picture day. The shoes are hot pink shiny numbers from Target.

This is a standby pattern – Farbenmix Olivia. The hood is lined in the same color as the sleeves. The main fabric is a purpley-blue with pink and purple fairies all over it. Size 122/128.

Jalie 2805 – view C

Playing a bit of catch up here –
I did make this one again, adding length to the sleeves and body. It appears that I forgot to take a picture after I hemmed it, so you get this one where I was trying to decide if I would hate it unhemmed.


In case you’re wondering, it wasn’t an issue of my not wanting to hem it. It was a thread color issue. I didn’t have an acceptable match (in my eyes) in my collection of serger threads. After some digging, I did find a suitable match in my sewing machine threads. I popped the spool and bobbin on the two spots on the coverstitcher where I’d normally put serger thread cones and then went with the darkest purple woolly nylon I could find for the underside. Worked wonderfully. Perhaps one of these days I will remember to snap a picture after it goes through the wash. Right now I’m too lazy busy to go dig it out of the dresser drawer upstairs.

Jalie 2805, view C

I’ve been putting this one off because the v-neck on it made me nervous, but it really wasn’t too bad. I made this one for me, tracing out a size U. I added 1.5″ to the sleeves. If I make it again, I’ll probably add another half inch. I didn’t add anything to the length and it falls right about where most of my RTW tops do, but next time I’ll add another inch, maybe an inch and a half.

This particular knit claimed to be 100% cotton when I bought it, but I suspect there is some poly in there. Some day I may get around to burn testing it. Mostly I’ve been using it to try new patterns and check the fit and sizing since it’s not really my favorite color anyway.

Anyway, playing with the photo editing software so you don’t have to see all the other junk on my table –
JALIE 2805

Here’s a close up of the neckline, which turned out pretty well, I think.
JALIE 2805

Snack bag tutorial

Snack Bags!
IMG_4250
We’re going to make 3 snack size bags, but once you have the process down, you can make them any size you like.

Aplix/touchtape/velcro closure snack bags
1. Start with a Fat Quarter (FQ) cotton woven, which will be approximately 22″x18″.
IMG_4215
2. Fold it in half, wrong sides together, so you now have a piece that’s 11″x18″.
IMG_4216
3. Press the fold. In the picture, the fold is on the bottom.
IMG_4217
4. Leave it folded and cut into 3 pieces. You will have 3 pieces that are 11″x6″ when folded.
First cut line:
IMG_4218
Second cut line:
IMG_4219
All cut!
IMG_4220

5. Cut a piece of 1.5″ wide aplix loop (ie, the fuzzy side) 4″ long. IMG_4231
Attach aplix to fabric 1/2″ from fold, and center across (about 1″ from each edge).
IMG_4222
I use an 80/12 universal needle and a medium zig zag stitch.
IMG_4224
Put the piece back on your table, aplix side down, folded end closest to you.

6. Bring the fold up 4″, so your top flap is 3″.
IMG_4229
7. Draw your rounded corners on the top flap. Quilter’s templates, round pattern weights, french curves or canned goods from the pantry all work well as tools to help you draw a smooth curve.
I start my curve about 1″ from where my folded fabric is. Look closely at the arrows and you should be able to barely see where my air erase marker lines are already fading!
IMG_4230

8. Starting at one end, serge all the way around. (If you are using aplix, you will have already attached the loop part. I was putting a different closure on this bag.)
IMG_4243

9. Attach the hook (scratchy) side now.
Attach about 1/2″ from top of flap, centering. I use 1″ hook for this side rather than 1.5″, just because it’s a little easier to pull apart that way, but if you only have 1.5″, that will work, too.
IMG_4232

Alternate closures – snaps, buttons, elastic

Skip step 5, unless you want to attach your buttons at that step. I like to use two and attach them 1.5″ from the top of the fold and 1.5″ from the edge.

Attach closures at step 9.
Buttons – sew buttons on if you didn’t do it at step 5. I like to use two and attach them 1.5″ from the top of the fold and 1.5″ from the edge. Create button holes on flap. You can also use one button in the middle.
IMG_4244
Snaps – same placement as buttons. I put sockets on the flap, but it’s really just personal preference.

Elastic – 5.5″ of 1/4″ elastic, attached with a short zig zag. Attach wherever your curve started. 1/8″ elastic will also work. 3/8″ is kind of big and may look a little funny on smaller bags, but it will do that job.
(You can attach the elastic at the same time as you serge around if you like, I just feel better about the tacking.)
IMG_4247
After my assistant put a couple legos in it:
IMG_4248

Foldover Closure Snack Bags
Steps 1-4 from above
5. Fold fabric right sides together and sew/serge raw ends together
Folded:
IMG_4234
And serged:
IMG_4235
6. Turn fabric right side out and press seam.
7. Lay flat and bring original folded end up to create 3″ flap at the top.
IMG_4236
8. Fold seamed side under 2 3/4″ and press
In the picture, the 2 3/4″ side is underneath. See how there’s a 1/4″ between the original fold and the new fold we just made? That gives it a little wiggle room when we flip it over to close the bag later.
IMG_4238
The back now looks like this:
IMG_4237
9. Serge both open sides.
Here’s the front:
IMG_4239
And here’s the back
IMG_4240

To close the bag, take the back flap and flip it over the front.
IMG_4241
It will look like this:
IMG_4242
All done!

These were serged with a 80/12 ball point needle using a 3 thread overlock stitch. I used Wooly Nylon in both loopers and Maxi-Lock in the right needle. On my machine, I set the stitch length just past 2 and the width at 3.5.

Want to make it in a different size? No problem. To make a single bag, first decide how wide you want it to be. Then decide how tall it should be. I usually make the flap 3/4 the size of the height of the bag, which gives room for the curve. If you do it that way, you will need a piece that is the width you want by the length * 5.5.

Creative Commons License
Snack Bag Tutorial by Kelly Cutler is licensed under a Creative Commons Attribution-Share Alike 3.0 United States License.

Ringbinder theme by Themocracy